Kenwood TS-850S - Manual (Page 20)

4-3. SSB OPERATION
AlP switch
When
switched on, it
reduces interference from
strong signals.
VOX/MAN switch
Used to operate VOX.
THRU/AUTO switch
THRU: Antenna tuner is off.
AUTO: Antenna tuner is on.
AGO switch
Set to SLOW.
PROC switch/control
Used to actuate the speech
processor circuit.
ATT switch
This switch allows attenuation of the
input signal by 6, 12 or 18 dB.
HIGH BOOST switch
The high-frequencies of the transmit
audio signal are emphasized.
METER key
Used to select
meter function in
FILTER key
Changes the
selectivity.
PWR control
Power can be controlled in
all modes.
MONI switch/control
Allows monitoring of your
transmit signal.
MIC gain control
Microphone gain can be
adjusted during operation.
(RECEIVING)
pT| Turn on the DC power supply and then turn the transceiver’s power switch ON.
|~2] A frequency is shown in the display.
3~| Press the UP/DOWN switches to select the desired frequency band.
When the 1 MHz step position is selected, the MHz indicator will light.
[~4~| Select USB or LSB with the MODE key.
The automatic switchover point on the transceiver is 9.5 MHz.
Turn the AF gain control clockwise until a signal or noise is heard.
Q Rotate the TUNING knob and select an open channel.
20