Kenwood TS-850S - Manual (Page 42)

No. Programmable functions Initial state
23
Select the Manual weight
(When Auto weight function is
OFF.)
3.0
24
Bug key: ON(Used)/OFF(Not
used)
(When the ELECTRONIC KEY
switch is ON.)
OFF
25
When split is selected, the
temporary display of the transmit
frequency can be turned on and
off.
ON
26
Display for the 50 MHz
converter: ON/OFF
OFF
27
Display for the 144 MHz
converter: ON/OFF
OFF
28
Display for the 430 MHz
converter: ON/OFF
OFF
29
Change the REC 1 recording
time to 8 or 16 seconds. (When
optional DRU-2 is installed)
8 seconds
30
Change the REC 2 recording
time to 8 or 16 seconds. (When
optional DRU-2 is installed)
8 seconds
31
Change the REC 3 recording
time to 16 or 32 seconds.
(When optional DRU-2 is
installed)
16
seconds
32
Transfer function when two TS-
850 are connected : ON/OFF
OFF
33
Turn on and off direct writing
into VFO by the transfer function
when two TS-850 are
connected.
OFF
34
The IF and AF circuits of this
transceiver can be switched off
(mute mode) so the transceiver
will not transmit even if the
standby terminal is grounded.
OFF
35
Transfer function when two TS-
850 are connected (SPLIT):
ON/OFF
OFF
Notes
1. When menu number 26, 27, or 28 is turned on,
the other two menu numbers are not displayed.
2. Menu number 34 can mute the IF and AF
circuits only, not the RF circuit. So if excessive
power is applied to the ANT connector during
muting, the RF circuit may be damaged. Do not
apply excessive power directly to the muted
side of the transceiver.
36