Kenwood TS-850S - Manual (Page 5)

Specifications ---- Model TS-850S
Unwanted sideband suppression (with 1.5kHz
reference)
More than 40dB
o
Maximum frequency deviation (FM) Less than ±5kHz
E
CO Frequency response (—6dB)
400 to 2600Hz
CT3
I-
10 Hz step More than ±1.2kHz
Ai 1 vanaoie range
20 Hz step More than ±2.4kHz
Microphone impedance 600n
Circuitry Triple conversion superheterodyne
Frequency range 100kHz to 30MHz
Intermediate frequency 1st; 73.05MHz, 2nd : 8.83MHz, 3rd : 455kHz
SSB, CW,
FSK
100kHz~500kHz Less than 0.2 //V
500kHz~1.62MHz* Less than 4 //V
(at lOdB S
+ N/N)
*1.62MHz~24.5MHz Less than 0.2
pc\/
Sensitivity
24.5MHz~30MHz Less than 0.13 //V
100kHz~500kHz Less than 2 //V
AM
(at lOdB S
+ N/N)
500kHz~1.62MHz* Less than 32 /^V
*1.62MHz~24.5MHz Less than
2
24.5MHz~30MHz Less than 1.3//V
0)
>
■(D
O
CD
CC
FM
(at12dBSINAD)
28MHz~30MHz Less than 0.25 //V
SSB, CW, FSK -6dB:2.4kHz, -60dB:3.8kHz
Selectivity AM -6dB:6kHz, -60dB;15kHz
FM -6dB:12kHz, -60dB:24kHz
Image ratio More than 80dB
1st IF rejection More than 80dB
Notch filter attenuation More than 40dB
10 Hz step More than ±1.2kHz
HM vanaoie range
20 Hz step More than ± 2.4kHz
100kHz~500kHz Less than 2 //V
Squelch
SSB, CW,
FSK, AM
500kHz~1.62MHz* Less than
20 /uV
sensitivity
♦1.62MHz~30MHz Less than 2 ;c^V
FM 28MHz~30MHz Less than 0.25 //V
Output 1.5W across 8 ohms load (10% distortion)
Output load impedance 8 ohms
Notes
1. Circuit and ratings are subject to change without notice due to advancements in technology.
2. Remember to keep the transmit output power within the power limitations of your license.
3. *: The U.S.A. version is 1.705 MHz.
4. **: With auto antenna tuner in “THRU” or bypass position.