Kenwood TS-850S User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4-19. When used as the master machine for the transverter
Notes
1. Be sure to unplug the DC power cable before starting work.
2. Advanced skills and knowledge will be needed for this type of operation. Be very careful to make
connections exactly as shown.
I Preparation
Shield cover
ICONNECTION
When connections are made as shown above, the PWR control on this unit does not work, so turn it fully
clockwise. The external ALC input is negative. The ALC circuit operates from about —9 V.
49
Advertising