Ii - "sil – Kenwood KR-V5560 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II - "Sil|
oo
1 i-rr^yrr i-r.rrr-rTi 1
A 0
# 0 =. a[=3i=i H
el
A, B OFF
Sound is not output from the speakers. Use this setting for lis
tening through headphones, etc.
A ON
Sound is output from the speakers connected to the SPEAKERS
A terminals on the rear panel.
B ON
Sound is output from the speakers connected to the SPEAKERS
B terminals on the rear panel.
A, B ON
Sound is output from the speakers connected to the SPEAKERS
A and B terminals on the rear panel.
• When a surround mode is activated while both SPEAKERS A and B
are ON, the SPEAKERS B system is automatically switched off. If
the SPEAKERS B key is pressed at this time, the SPEAKERS B sys
tem is switched ON and.the SPEAKERS A system is switched OFF
automatically.
• If the cassette deckfs), CD player and/or turntabie is connected
through system control cords, the component of the selected input
source starts to play automatically.
The input sources are switched in
the following order:
—^<T) TUNER (frequency display)
ij) TAPE 1
(3) VIDEO 1
<i) VIDEO S
® CD
>-►(1) PHONO
The selected source is
displayed.
r
77
L
JJ
The selected input source is held in memory for about 3 days even
after the power cord is unplugged from the mains outlet.
( The sound of input source cannot be listened to while TAPE 2 is
ON.
* When the volume is adjusted from the remote control unit, the
VOLUME CONTROL knob rotates.