Mi4ne4>him»kwri, Automatic operation – Kenwood KR-V5560 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
mi4nE4>hiM»kwri
4
: Make connection as shown below. When connecting the related system components, refer also to the instruction manuals o
the related components.
Do not plug in the power lead until all connections are completed.
Automatic operation
When this unit is connected to KENWOOD system components such as a cassette deck and CD player through system control cords and the inpu
source is selected with the INPUT SELECTOR, the selected component starts to play automatically. Inversely, playing a component automatical!'
selects that source as the input to this unit. The automatic operation also occurs when the provided remote control is used.
I
Notes
I
“T7“Cdnnect all cords firmly. If connections are loose, there could be loss of sound or noise, produced,
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
4. Insert the systecn control plugs completely into the jacks.
5. If the system control cords or audio cords are not connected properly, the remote control or automatic operation between system
components will not work properly.