Kenwood KR-V5560 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FM DE-EMPHAS/S/CHANNEL SPACE switch
(Except for U.SA, Canada, Mexico and Austraiia)
The FM DE-EMPHASIS / CHANNEL SPACE switch on the rear
panel is set to the correct setting that prevails in the area to which
the unit is shipped, However, if the FM DE-EMPHASIS / CHAN
NEL SPACE setting is not matched to the area where the unit is to
be used; for instance, when you moved from area 1 to area 2 or
vice versa, desired reception of AM / FM broadcasts is not ex
pected. In this case, change the FM DE-EMPHASIS / CHANNEL
SPACE setting in accordance with the area corresponding to the
table. The FM DE-EMPHASIS is switched over at the same time.
► When changing the setting of the FM DE-EMPHASIS / CHAN
NEL SPACE switch, first disconnect the power cord of the am
plifier, then reset the channel spacejswitch, connect the power
cord again, and turn the power on.