Kenwood KR-V5560 - Manual (Page 22)

This mode improves the positioning of the acoustic image
j s of words, etc., by applying directivity enhancer processing
I and using an additional center speaker when a video soft-
I ware program recorded with ordinary 2-channel stereo is
played.
/ Activate the DOLBY3 STEREO mode.
O
(|) Select the center mode using a
sharp object (such as a ball-point
pen).
(Z:
Ptaya video software program.
^ Adjust the voiume.
&
VOUJMECONTBDL
a a
Each pn
follows,
of the CENTER MODE key switches the center modes a;
O ' NORMAL
WIDEBAND :
I—► O ' NORMAL : When the center speaker is a compact-sized
speaker,
I — WIDEBAND : When the center speaker is a medium- or
large-sized speaker,
I If you cannot tell whether your center speaker is compact or me
dium-sized, try two modes and select according to your liking.
I The selected center mode is automatically stored in memory an*
held unless it is changed later.
• The test tone which is heard like noise moves between speakers a
an interval of 1.5 sec.
I— ► Left (L)
Center to
I---- Right (R)
SPEAKERS o
VIDEO
rrr T
i L J i
i
■ Be sure to adjust from your listening position.
■ When a key is pressed, the volume level is displayed on the dis­
play, While the level is displayed, it can be adjusted by 1 dB per
press of the key.
» The center level can be adjusted in the range from -10 dB to +10
dB.
• The center level is stored in memory as the common settings
with the DOLBY PRO LOGIC surround mode.
To cancel DOLBY 3 STEREO piar