Antenna connection, Connecting an antenna with hd-stb, tv and vcr, Connecting an antenna with hd-stb and tv – JVC DVB TU-HD500A User Manual
Page 14: Connecting your hd-stb
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting your HD-STB
You should connect your HD-STB to an external antenna. Follow the direction Antenna
Connection,
Next you will connect the HD-STB to the TV, HDTV or HD Monitor. Follow the direction Video
Connection,
And you will connect the HD-STB to TV Audio or Home Theater Audio system.
Follow the direction Audio Connection,
1. Antenna Connection
Connecting an antenna with HD-STB, TV and VCR
Connect the I EC Male antenna cable end onto the ANT IN terminal on the rear of
your HD STB.
Connect the antenna cable end between the LOOP OUT terminal on the rear of your
HD STB and ANT IN terminal on the rear of your VCR.
Connect another antenna cable end between the RF OUT terminal on the rear of your
VCR and RF IN terminal on your TV. { Refer to Fig.l )
Connecting an antenna with HD-STB and TV
Connect the I EC Male antenna cable end onto the ANT IN terminal on the rear of
your HD-STB.
Connect the antenna cable end between the LOOP OUT terminal on the rear of your
HD STB and RF IN terminal on your TV. ( Refer to Fig.2)
Fig.l HD-STB Antenna Connection
with TV and VCR
Fig.2 HD-STB Antenna Connection
with TV only