JVC DVB TU-HD500A - Manual (Page 19)

4. Setting up the Display Mode.
This HD'STB support all High Definition / Standard Definition Video resolution of
Australian Standard, you can select correct one for your HDTV/TV’s reception ability.
For setting up the correct display resolution, adjustment two switches on the rear of the
HD-STB.
Follow the Display Mode table.
DISPLAY MODE
Connecting your HD-STB
SD HD 1 HD 2
TV, S-VIDEO 1080М 1080М (1250)
SD YPbPr 720p 1152Ì
SD RGsB 576p 576P/11521/1080i (1250)
For example, if you have HDTV, connect with YPbPr, and you want lOSOi resolution, then
DISPLAY Switch set to ‘HDl" and MODE Switch set to "Ml*
If you setting up one mode and your HDTV cannot display correct picture, then your HDTV
does not support that HD Video resolution. For example, if you select HDl and M2 (720p
mode) and your HDTV cannot display correct picture, then your HDTV does not support
720p resolution video mode.
At that time, simply try to other video mode. (lOSOi or 575p).
This HD STB's HDl is Native Mode display and HD2 is CRT Display setting. Usually, HDTV
supported the Native Mode and HD Monitor supported CRT Display.
When you select HDl or HD2 position, this HD STB supported HD YPbPr and HD VGA
simultaneously.
The HD2.M3 position is setting up Auto CRT Mode,
Auto CRT Mode is deliver best picture without scan converting.
If your HDTV support Auto CRT Mode, please feel free to try it.
Auto CRT Mode
Video Source Output Display
576i 576p
576p 576p
720p 11521
10801 10801(1250)
14