Audio connection, Stereo audio connection, Connecting your hd-stb – JVC DVB TU-HD500A User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting your HD-STB
3. Audio Connection
This HD'STB can support tour different way of audio connection. Each of the audio
connection deliver the same audio sound. You can select desired audio connection
followed by below Audio Connection Diagram,
Stereo Audio Connection
The Audio 1 and Audio 2 are deliver analog stereo sound or Dolby Digital Downmixed
2 Channel analog stereo sound.
Connect Audio Cable to the Audio 1 or Audio 2 terminal on the rear of the HD STB.
Connect the other end of the Audio Cable to the conventional TV Audio Input or
Stereo Amplifier Audio Input. ( Refer to Fig. 9 )
The Optical Digital Audio and Coaxial Digital Audio are deliver Dolby Digital 5.1
digital sound or PCM digital sound.
If you have Home Theater System and it can received Digital Audio, then you can
connect Digital Audio.
For the Optical Digital Audio connection. Connect the Optical Digital Audio Cable
(Available in Local Store) to the Optical Audio terminal on the rear of the HD STB.
Connect the other end of the Optical Digital Audio Cable to the Optical Audio Input
terminal on the Home Theater System.
For the Coaxial Digital Audio connection. Connect the RCA Cable to the Coaxial
Audio terminal on the rear of the HD-STB. Connect the other end of the RCA Cable to
the Coaxial Audio Input terminal on the Home Theater System,
Fig. 10 Digital Audio Connection
13