Connecting your hd-stb – JVC DVB TU-HD500A User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting your HD-STB
Connecting to a SDTV with SD YPbPr
Connect YPbPr Video cable to the SD terminal on the rear of HD STB.
Connect the other end of YPbPr Video cable to the SD YPbPr Input terminal on the TV.
Usually, the Y is Green, Pb is Blue and Pr is Red color assigned.
Setting Up the Display Switch to SD and Mode Switch to M2. (Refer to Fig.5)
Connecting to a SDTV with SD RGB
Connect RGB Video cable to the SD RGB terminal on the rear of HD-STB.
Connect the other end of RGB Video cable to the SD RGB Input terminal on the TV.
Setting Up the Display Switch to SD and Mode Switch to M3. (Refer to Fig.6)
Note: This HD-STB cannot support SCART type connector, so you cannot connector
SCART input TV,
Fig.6 SD RGB Video Connection
11