JVC DVB TU-HD500A - Manual (Page 20)

Getting Started
Step 1. Check up the contents in the Corton box.
After open the gift box, you should check up and find the following items.
- Digital HD-STB
Universal Remote Control
User's Guide
- Batteries <2 AAA/R03)
SD A/V Cable (Yellow/White/Red) & HD Video Cable (Green/Blue/Red)
RFCable
If you find missing or broken part, then ask to supplier or contact to service center.
Step 2. Connect ANT Coble.
Connect external ANT cable to ANT IN.
Connect another ANT cable between LOOP OUT of HD STB and ANT IN of TV for analog
reception.
Step 3. Connecting the Video and Video Mode Setting.
Prepare HD STB and HDTV you want to connect.
There are several methods to connection video. You should find correct connection
method for your HDTV. Please refer Video Connection Diagram.
For the Video Mode Setting, you should check up the Display switch and Mode switch
as follow.
DISPLAY MODE
SD HD 1 HD 2
TV, S-VIDEO 1080i lOaOi (1250)
SD YPbPr 720p 1152i
SD RGsB 576p 576p/1152i/1080i (1250)
Step 4. Connecting the Audio.
Prepare HDTV or Audio equipment you want to connect.
There are tour different connection methods for Audio connection.
For general TV analog audio connection, it has AUDIO 1 and AUDIO 2.
It is quite same thing so you can select anything you want.
For digital audio connection, you should prepare Optical Audio cable for optical audio
connection for Home Theater System,
It your Home Theater Equipment system has coaxial digital input, you can use well
shielded RCA cable for coaxial audio connection.
Step 5. Connecting the Power.
Plug the Power Cord to wall AC outlet. The power source is AC 100 250V-/ 50/60Hz,
This unit is designed for continuous operation.
Switching it oft does not disconnect it from the AC outlet. To disconnect this HD STB
from AC outlet, you have to unplug the HD STB.
15