Cash amount tender / total key ([at/tl]), Charge total key ([chg]) – Toshiba TEC MA-71 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
El-01402
CASH AMOUNT TENDER / TOTAL KEY ([AT/TL])
This key is used to finalize a cash sale.
This key can be programmed to be used as one of the following three types:
1. AMOUNT TENDER KEY
If so programmed, this key requires a tendered amount entry prior to
depressing this key. Tax is calculated and printed with the “TX” symbol.
The sale total with tax with the “TL” symbol (if
[ST]
has not been
depressed), cash tendered amount with the “AT” symbol, and the
change due with the “CG” symbol are each printed on separate lines.
Meanwhile, the display shows the amount of change due.
When the tendered amount is less than the sale total, all the printing
sequence above will be the same except that the balance due is
displayed (not printed) instead of the change due. In this case, the sale
is not yet finalized and another media tendering or totalling using
[AT/TL],
or
[Chg]
will be required.
When the sale total is negative, as in some cases with returned
merchandise entries, the
[AT/TL]
key must be depressed without a prior
amount entry, as described in “2. TOTAL KEY” below.
2. TOTAL KEY
If so programmed, this key can be depressed without a prior amount
entry for sale finalization. Tax is calculated and printed with the “TX”
symbol. The sale total is printed with the “CA” symbol.
When the sale total is negative, the sale total is printed with the “ - ” as
well as the “CA” symbol. The display shows the sale total amount with
the “TL” and “( - )” arrow lamps lit. In this case, the operator must
refund the amount in cash to the customer.
3. AMOUNT TENDER / TOTAL KEY
If so programmed, this key will function as TENDER KEY (as described in
1 above) when any prior amount is entered, and will function as TOTAL
KEY (as described in 2 above) when depressed without an amount entry.
Chg
CHARGE TOTAL KEY ([Chg])
This key is used as an alternative method of payment for a charge sale.
Since this is the TOTAL KEY, operate the same as described in “2. TOTAL
KEY” of the
[AT/TL]
key. A negative-balance sale may also be finalized by
this key.
11