Toshiba TEC MA-71 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
El-01402
3. % RATE ONLY
1) Enter “0” (zero), depress [TX/M], and depress [ST].
2) Enter the percent rate in the same manner as in Step 5) of Method 2 on the
previous page.
3) Depress [AT/TL] to end the percent rate entry and the entire tax program.
SAMPLE OPERATION
Tax table
10% is applied to
any amount.
To program the following tax table;
Key Operation
Mode Lock to SET.
0 [TX/M]
[ST]
10000 [AT/TL]
NOTES: 1) A maximum of a 3-digit value is entered for each break (9990 i.e. $9.99).
It will result in an error with a 4-digit value or more.
2) If an incorrect value has been entered through [TX/M], first complete the
entire tax table program (up to the [AT/TL] key operation), and do the
correct tax table program entry over again from the first step.
-
44
-