Department status setting or changing – Toshiba TEC MA-71 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
El-01402
NOTES:
1) Initial zeros may be omitted. For example only “11026” may be entered
instead of “0011026”.
2) When a numeric value larger than those specified is entered, it will result in the
same as the maximum numeric value of those specified.
SAMPLE OPEFtATION To set the following requirements:
[%] Function -- [%-]: 0
[AT/TL] Function -- Tender & Total: 0
Credit Balance - Allowed: 1
Fraction -- ROUND OFF —i
GT - Print
J • ^
Time - Non-print: 0
Date - MONTH-DAY-YEAR: 2
Listing Capacity - 6 digits: 6
Mode Lock to “SET”.
Enter 0011026 (or 11026), depress [ST].
G 1 1 0. 2
DEPARTMENT STATUS SETTING OR CHANGING
COpNCMl'^ON^ After Daily Reset, GT Reset
(,QP£F]AT|0N) Mode Lock: SET
3[X]
■> [TX/M]
to reverse
Taxable/ Non-
taxable status
no change
-► 0
to set Itemized
Dept status
[DEPT]
-► 1
to set Single-item
Dept status
-► [AT/TL]
Repeat for another department.
-
36
-