Toshiba TEC MA-71 - Manual (Page 42)

El-01402
Each department may be assigned a listing capacity (a digit limit for amount entries at the time
of sales). By setting a listing capacity, an excessive amount entry (due perhaps to a mistake
by the operator) will be prevented at the earliest stage (i.e. an error will result on entering an
excessive amount through the department key).
DEPARTMENT LISTING CAPACITY SETTING OR CHANGING
C
COf^DfTION^ After Daily Reset
( q |>£RA1QN) Mode Lock: SET
8[X] Number of digits allowed [DEPT]
for a sale entry__________
1 to 7 (unit: digits)*
(0, 8, or 9 will reset the limit,
i.e.any amount up to 7 digits
will be allowed.)
Repeat for other departments.
[AT/TL]
: For example, if “4”
is entered, up to
99990 ($99.99) will
be allowed as a sale
entry amount
through the
department.
ex.) To set each department with the following
Listing Capacity (4 Dept, type):
Dept.1
Dept.2
Dept.3
Dept.4
LC (digit limit)
5 digits ($999.99)
4 digits ($99.99)
3 digits ($9.99)
2 digits ($0.99)
Mode Lock to “SET”, enter 8, depress [X].
Enter 5, depress [DEPT 1].
Enter 4, depress [DEPT 2].
Enter 3, depress [DEPT 3].
Enter 2, depress [DEPT 4].
[AT/TL] to end this program.
NOTE: Since the Listing Capacity is provided to check the amounts entered in the
“REG” mode, it will be disregarded when a preset price is set on a department
(in a separate operation described later).
-39
-