Toshiba MA-215-10 SERIES - Manual (Page 12)

FUNCTION OF EACH KEY
ON
0
OFF
RECEIPT ON/OFF SWITCH
This switch has two positions available, *OFF' and 'ON' positions.
When in the 'OFF', no receipt is issued from the register and sales
are printed on the audit roll only. When the switch is siided to the
'ON' position, sales are printed on both receipt roll and journal
roll, then a receipt is issued which is automatically cut off and then
given to the customer.
Alternating the switch position during a sale will not result in an
error. In this case, the position set at the starting will rule
whether a receipt is issued or not. When a reset (Z) report is taken,
however, the data will be printed also on the receipt roll regardless
of the switch position.
VALI
DATE
S
VALIDATION KEY ([VALIDATE])
This key is used to print a validation slip.
To operate, insert a slip into the validation slot after registering
the required item, and depress the [VALIDATE] key. The item and the
amount will be printed on the slip.
The system option provides program selections as to single- or multi-
validation.
RECEIPT FEED KEY ([RF])
This key is used to advance the receipt roll. It is operated by
depressing the key and holding it in that position until the paper
has advanced to the required position.
This key can be operated in any position of the Mode Lock except the
"OFF" position.
JF
J JOURNAL FEED KEY ([JF])
This key is used to advance the audit roll in the same fashion as the
[RF] key. This key is useful is the cashier, due perhaps to an
interruption whilst ringing up a sale, is unsure which items have
already been entered. By using this key, the cashier can see which
figures have actually been printed.
The [RF] and [JF] keys can not be operated simultaneously.
-6-