Toshiba MA-215-10 SERIES - Manual (Page 16)

TXl/M
TX2/M
TX/M
This key is used to correct a numeric entry error if prior to
depressing any other function key, or to correct any error condition
and cancel an alarm buzzer.
If this key is depressed before depressing the Department Key or [PLU]
in a quantity extension sequence, all of the quantity entry, the [X]
key entry, and the unit price entry are cleared at a time.
If the [C] key is depressed after a sub-total is obtained, the
sub-total is then desplayed.
The [C] key may be operated regardless of Mode Lock positions except
"OFF".
TAX MODIFIER KEYS ([TXI/M], [TX2/M] ...... for a dual-tax area)
([TX/M] ............. for a single tax area)
These keys are used to modify taxable or non-taxable departments, PLUs,
[-]> [%-]) or [%+] items to its reverse status.
for dual-tax areas, two keys are provided ... [TXl/Ml and [TX2/M] ...
in place of the [TX/M] key for single-tax areas. The two tax modifier
keys will function independently each with its own tax table
preprogrammed for taxble items.
To operate, depress the Tax Modifier keyCs) prior to depressing any of
the above mentioned keys.
CLEAR KEY ([C])
(mill
lAli.lU
i±imi
loiooi'l
HUHERIC KEYS ( |_| )
These are used to enter numeric values such as amount, quantity, or
code number.
Depressing the [00] key once is the same as depressing the [0] key
twice consecutively.
The [.] key is used to enter the decimal point of a manual percent rate
containing decimal portion. For example, to enter 0.5%, index 0-►[. ]
5, or [. ] - 5.
The maximum listing capacity for sale item amount through a department
or PLU is 8 digits. If a listing capacity is programmed for a
department, any amount entry exceeding the limit digit will result in
an error.
-10-