Display – Toshiba MA-215-10 SERIES User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DISPLAY
The Operator's Display (front display) is located at the top of the register
just above the keyboard. The Customer's Display may be used as Rear Display
if it is kept in the receptacle or used as Remote Display if it is stretched
up and turned to the required direction. The display has two types of
indications numeric display and message descriptors.
FRONT DISPLAY
PLU
-----------
DPT RPT
AMOUNT
n /
U 1
i? 1
^ 3
_< o
n
1
8
T
f f
T T
T
T
SLP
ALH RCG
(-} TXBL
ST TL
CG
SHORT
REAR/REMOTE DISPLAY
AMOUNT
P
c
3
S'
c c
o
n
1
8
T
T T
T T
f
f
(-)
TXBL
ST TL
CG
SHORT
NUMERIC DISPLAY
AMOUNT (8 digits): Displays the numeric data, such as amount, quantity,
etc.
RPT (1 digit):
Displays the repeat count of a Department or PLU item.
The count is indicated from the second entry on, and
only the first digit will be displayed even if the count
exceeds nine.
DPT (2 digits):
Displays the code which represents each Department Key
PLU (3 digits):
Displays the PLU code when a PLU item is entered.
MESSAGE DESCRIPTORS (TRI-MARKS to appear)
SLP; Lights up when a validation slip has been properly inserted to allow
validation.
▼
ALM: Lights up to indicate that the last operation or numeric entry has
resulted in an error. To clear the error condition, depress the [C]
key.
T
REG: Lights up when sale items have been entered.
-4-