Toshiba MA-215-10 SERIES - Manual (Page 13)

#/NS
NON-ADD NUMBER PRINT/NO-SALES KEY U#/NS])
This is a dual-function key.
NON-ADD NUMBER PRINT FUNCTION
When the Mode Lock is in the REG position and a number is entered
before depressing this key, this key functions as non-adding number
(such as Customer No., Credit Card No., etc.) key.
NO-SALE FUNCTION
When the Mode Lock is in the REG position, and the key is simlpy
depressed without any prior numeric entry, this key functions as
no-sale key.
This key is also functions to read the Cash-in-drawer Total memory
when the key is simply depressed while the Mode Lock is in the "X"
position .
PLU
PLU (Price-Look-Up) KEY ([PLU])
This key is used to enter a PLU that is 1 inked to a department. Each
PLU is programmed with its code (1 to 999) and preset price.
To operate, enter the PLU code and then depress the [PLU] key. The
preset price is automatically read and entered into the department
to which the PLU is linked. To repeat the same PLU price, depress
the [PLU] key consecutively after the above operation.
As for quantity extension involving PLUs, refer to the [@/FOR]
description on page 8. Also refer to the [RTN MDSE] key description
as to return entry through a PLU.
If a PLU's link Department Key is programmed as a Single-item Key,
an entry through that PLU also functions as the single-item process.
That is, that PLU can only be registered outside a^sale and the sale
will immediately be finalized as cash on the depression of the [PLU]
key without operating a media key such as [AT/TL].
ITEM
CORR
ITEM CORRECT KEY ([ITEM CORR])
This key is used to delete the last item within a transaction.
Depressing this key once will remove the last line item from the bill,
printing a line through the item on the receipt and journal.
The item-correct function is effective even when a numeric entry and a
[C] key depression are already performed between the item-to-be-
corrected and the [ITEM CORR] key depression. However, if any other
key-in operation including an error comes inbetween, the item correct
will not function.
The [ITEM CORR] key may function to delete the last item entered
through a department, a PLU, the [%-], [%+] , [DOLL DISC], [R/A], or
[PO] keys. But a returned department or PLU item entered with the [RTN
MDSE] key cannot be item-corrected.
-9-