Toshiba MA-141 - Manual (Page 48)

NOTES: 1. Among iTXl/M| (|TX/M1) and 1TX2/M| keys, depress
the key(s) for the required status change(s} for each
department. The I RTN^MDSEI is depressed to set or reset
the negative DEPT status.
2. Depressing any of the three keys above,
status reverses. For example, depressing
reverses a non-taxable DEPT to a taxable,
to non-taxable. Each department status is
the related
the [TX.V m !
or taxable
read by the
number indicated on the display when each depart­
ment key is depressed in the above operation. , The numbers
and their respective statuses are:
0: Non-taxable
1 : Tax 1 only
2: Tax 2 only
3; Tax 1 and Tax 2
Watching the number, adjust the status by depressing
those keys. See the examples below:
'STATUS NUMBER
BEFORE change "
0
0
0
KEY-IN FOR CHANGE
PRIOR TO I DEPT I key ”
1 txi / m 1
ITXI/MlITX2/MI
|TX2/M|
NEW NUMBER AND
STATUS OBTAINED
l(Taxl only)
3(Taxl and Tax2'
2(Tax2 only)
etc.
iTXl/Ml 0(Non-txbll
1 —> 1TX2/M1 -- > 3{Taxl and Tax2)
1 —> ! txi / m |1 tx 2/ m | 2(Tax2 only)
etc.
2 i TX2/M1 —^ 0(non-taxable)
2 ^ 1TXl/M1 —^ 3(Taxl and Tax2)
3 | txi / m 1 2(Tax2 only)
etc
3. In order to simplify the status setting operation, each
department status may be reset to "0" by entering "0"
and depressing the department key. (This can only be
done after a GTZ reset and a FLU Z reset.) Then the
required status is set simply by depressing the keys
ITXI/Ml (¡TX/ m |) and/or |TX2/ m 1, each only once.