Headlight time delay, Headlights on with wipers (available with, Automatic headlights only) – Chrysler 2015 300 - Owner Manual User Manual

Page 152

Advertising
background image

Headlights On With Wipers (Available With
Automatic Headlights Only)

When this feature is active, the headlights will turn on

after the wipers are turned on if the headlight switch is

placed in the AUTO position and programmable feature

is set to ON. In addition, the headlights will turn off

when the wipers are turned off if they were turned on by

this feature.
NOTE:

The Headlights On with Wipers feature can be

turned on or off using the Uconnect® System. Refer to

“Uconnect® Settings/Customer Programmable Fea-

tures” in “Understanding Your Instrument Panel” for

further information.

Headlight Time Delay

This feature provides the safety of headlight illumination

for up to 90 seconds (programmable) when leaving your

vehicle in an unlit area.

To activate the delay feature, place the ignition in the OFF

position while the headlights are still on. Then, turn off

the headlights within 45 seconds. The delay interval

begins when the headlight switch is turned off.
If you turn the headlights or parking lights on, or place

the ignition in ACC or RUN, the system will cancel the

delay.
If you turn the headlights off before the ignition, they will

turn off in the normal manner.
NOTE:

• The lights must be turned off within 45 seconds of

placing the ignition in the OFF position to activate this

feature.

• The headlight delay time is programmable using the

Uconnect® System, refer to “Uconnect® Settings” in

“Understanding Your Instrument Panel” for further

information.

150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising