Chrysler 2015 300 - Owner Manual - Manual (Page 289)

Display
After pressing the “Display” button on the touchscreen
the following settings will be available:
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, press and re-
lease the “Manual” or “Auto” button on the touchscreen.
Then press the back arrow button on the touchscreen.
NOTE:
When Day or Night is selected for the Display
Mode, the usage of the Parade Mode feature will cause
the radio to activate the Display Brightness Day control
even though the headlights are on.
• Display Brightness With Headlights ON
When in this display, you may select the brightness with the
headlights on. Adjust the brightness with the “+” and “–”
setting buttons on the touchscreen or by selecting any point
on the scale between the “+” and “–” buttons on the touch-
screen. Then press the back arrow button on the touchscreen.
NOTE:
To make changes to the ЉDisplay Brightness with
Headlights ONЉ setting, the headlights must be on and
the interior dimmer switch must not be in the ЉpartyЉ or
Љ
paradeЉ positions.
• Display Brightness With Headlights OFF
When in this display, you may select the brightness with the
headlights off. Adjust the brightness with the “+” and “–”
setting buttons on the touchscreen or by selecting any point
on the scale between the “+” and “–” buttons on the touch-
screen. Then press the back arrow button on the touchscreen.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 287