Fcw limited warning, Service fcw warning, Lanesense — if equipped – Chrysler 2015 300 - Owner Manual User Manual

Page 209: Lanesense operation

Advertising
background image

FCW Limited Warning

If the DID displays “ACC/FCW Limited Functionality”

or “ACC/FCW Limited Functionality Clean Front Wind-

shield” momentarily, there may be a condition that limits

FCW functionality. Although the vehicle is still drivable

under normal conditions, the active braking may not be

fully available. Once the condition that limited the sys-

tem performance is no longer present, the system will

return to its full performance state. If the problem per-

sists, see your authorized dealer.

Service FCW Warning

If the system turns off, and the DID displays:

• ACC/FCW Unavailable Service Required
• Cruise/FCW Unavailable Service Required
This indicates there is an internal system fault. Although

the vehicle is still drivable under normal conditions, have

the system checked by an authorized dealer.

LANESENSE — IF EQUIPPED

LaneSense Operation

The LaneSense system is operational at speeds above

37 mph (60 km/h) and below 112 mph (180 km/h). The

LaneSense system uses a forward looking camera to

detect lane markings and measure vehicle position

within the lane boundaries.
When both lane markings are detected and the driver

unintentionally drifts out of the lane (no turn signal

applied), the LaneSense system provides a haptic warn-

ing in the form of torque applied to the steering wheel to

prompt the driver to remain within the lane boundaries.

If the driver continues to unintentionally drift out of the

lane, the LaneSense system provides a visual warning

through the Driver Information Display (DID) to prompt

the driver to remain within the lane boundaries.
The driver may manually override the haptic warning by

applying torque into the steering wheel at any time.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207

Advertising