Overtake aid, Acc operation at stop – Chrysler 2015 300 - Owner Manual User Manual

Page 191

Advertising
background image

Overtake Aid

When driving with ACC engaged and following a Target

vehicle, the system will provide an additional accelera-

tion to assist in passing vehicles in front. This additional

acceleration is triggered when the driver utilizes the left

or right turn signal. The Overtake Aid will only provide

additional acceleration if the vehicle moves with the

corresponding turn signal and until the current set speed

is reached. The ACC system will automatically detect

traffic direction in the respective lane when the right or

left turn signal is utilized.

ACC Operation At Stop

If the ACC system brings your vehicle to a standstill

while following a target vehicle, if the target vehicle starts

moving within two seconds of your vehicle coming to a

standstill, your vehicle will resume motion without the

need for any driver action.

If the target vehicle does not start moving within two

seconds of your vehicle coming to a standstill, the ACC with

Stop system will cancel and the brakes will release. A cancel

message will display on the DID and produce a warning

chime. Driver intervention will be required at this moment.
While ACC with Stop is holding your vehicle at a

standstill, if the driver seatbelt is unbuckled or the driver

door is opened, the ACC with Stop system will cancel

and the brakes will release. A cancel message will display

on the DID and produce a warning chime. Driver inter-

vention will be required at this moment.

WARNING!

When the ACC system is resumed, the driver must
ensure that there are no pedestrians, vehicles or
objects in the path of the vehicle. Failure to follow
these warnings can result in a collision and death or
serious personal injury.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189

Advertising