Crosman 4032 - Manual

Mounting Procedure
1. Locate the mounting position for your specific gun.
Note: This scope should be mounted with the eye piece 3 inches
away from your eye. Depending on the ideal location you may need to
remove your standard rear sight.
2. Loosen the mounting screws A and B and place the scope and mount
in the grooves of your receiver.
3. Tighten screws A and B.
4. Check the scope to make sure the crosshairs are square.
5. If the crosshairs are not square, loosen screws C and D and turn the
scope to the desired position.
6. Tighten screws C and D
Focus Adjustment
1. With the gun pointed in a SAFE DIRECTION, look through the scope
with the eyepiece 3 inches away from your eye.
2. If the image is not clear, you will need to adjust the focus.
3. Turn the focus adjustment ring clockwise and/or counter-clockwise until
the view appears clear.
Scope adjustment
Your scope should be adjusted for your particular gun, your shooting
style, and target distance. By first shooting a group of shots you will
know what type of adjustment to make. To check your group of shots, set
a bulls-eye target at your preferred distance. Follow your owner's manual
to load and fire your particular gun.
Elevation adjustment
1. The elevation adjustment wheel will move the impact point up or down.
2. Remove the cap from the elevation adjustment wheel.
3. To raise the point of impact, turn the elevation dial counter-clockwise,
following the arrow.
4. To lower the point of impact, turn the elevation dial clockwise.
5. Repeat the above steps as needed.
6. Replace the cap when your elevation adjustment has been completed.
Windage adjustment
1. The windage adjustment wheel will move the impact point left or right.
2. Remove the cap from the windage adjustment wheel.
3. To move the point of impact left, turn the windage dial clockwise,
following the arrow.
4. To move the point of impact right, turn the windage dial counter-
clockwise.
5. Repeat the above steps as needed.
6. Replace the cap when your windage adjustment has been completed.
How to Care for Your CenterPoint 4032 Scope
Keep the scope away from harsh chemicals.
Always use a soft cloth, moistened with alcohol to clean any dust or dirt
from the lenses of your scope.
CenterPoint Precision Optics
7629 Routes 5 & 20
East Bloomfield, NY 14443
www.centerpointoptics.com
1-866-726-1122
4032A515
YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING
GLASSES TO PROTECT YOUR EYES.
READ ALL INSTRUCTIONS BEFORE USING.
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT
THE USE AND OWNERSHIP OF THIS SCOPE.
Please read this owner's manual completely. Always carefully follow the
safety instructions found in this owner's manual and the owner's manual
of your airgun or rifle, as well as the rules for safe shooting. Keep this
manual in a safe place for future use. The 4032 scope has an outer cover
made of high-strength aluminum alloy which has a special anticorrosive
treatment. The optical pieces are plated with anti-reflection coating and
is anti-vibration, anti-fogging and shock resistant.
1. Objective lens 4. Focus Adjustment ring
2. Windage (horizontal) adjustment wheel 5. Eyepiece
3. Elevation (vertical) adjustment wheel
6. Ring Mounts
Learning the parts of your scope
Learning the names of the parts of your new scope will help you to under-
stand your owner's manual. Use this manual to increase your enjoyment
of this scope and your shooting experience.
MODEL 4032
4x32mm Scope
OWNER'S MANUAL
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING THIS SCOPE
1
3
2
4
5
6
Model 4032
Magnification 4x
Objective Diameter (mm) 32
Exit Pupil (mm) 6
Eye Relief (inches) 3.0
Field of View (@ 100yds) 28’
Tube Diameter (inches) 1
Length (inches) 10.5
Weight (ounces) 12.9
W/E Adjust Click Value 1/4 MOA
Parallax Setting (yds) 30
Specifications
A
B
C
D
LIMITED LIFETIME WARRANTY ON CENTERPOINT SCOPES
Your CenterPoint scope is warranted to be free of defects in materials and
workmanship for the lifetime of the original owner. This warranty does not
cover damages due to fair wear and tear, failure to provide routine mainte-
nance, and does not include batteries or accessories. This warranty lasts as
long as the original purchaser owns the product, and is not transferable. In
the event of a defect under this warranty, we will, at our option, repair or
replace the product provided our inspection indicates that an original defect
exists. CenterPoint reserves the right to replace any product which is no longer
available with a product of comparable value and function. If CenterPoint deter-
mines the repair is not covered under the warranty guidelines, there could be a
charge to you for the repair. This is a limited warranty and does not cover damages
caused by misuse, improper handling or installation or maintenance provided
by someone other than a CenterPoint Authorized Service Station.
This limited warranty does not include consequential damages, incidental dam-
ages, or incidental expenses, including damage to property or any other expense.
CenterPoint disclaims any implied warranties. Some states do not allow the exclu-
sion or limitation of incidental or consequential damages, or allow limitations on
implied warranties so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state and country to country.
WARRANTY CLAIMS/ REPAIR SERVICE
If your scope needs repair, call CenterPoint Customer Service at 1-800-726-1122
or visit our web site at www.centerpointoptics.com DO NOT ATTEMPT TO DIS-
ASSEMBLE IT! Any disassembly or modification not performed by an Authorized
Service Station will void the warranty.
USA Customers: Please contact CenterPoint before shipping your product.
Include with product your name, address, description of problem, phone number
and copies of sales receipt and warranty. A check or money order in the amount
of $10.00 to cover the cost of postage and handling is also required. Package
and return to CenterPoint, Crosman Corporation, 7629 Rts. 5 & 20, E. Bloomfield,
NY 14443. CenterPoint will not assume any responsibility for any loss or damage
incurred in shipping.
Canadian Customers: Contact Crosman Parts and Service at (705) 749-0206
before shipping your product. Follow packaging and shipping procedures above
and send to Crosman Parts & Service Depot, 611 Neal Drive, Peterborough,
Ontario K9J 6X7 Canada. Shipping and handling costs may apply.
Other International Customers: Please return product to your nearest distrib-
utor. If you do not know your distributor, please call 585-657-6161 and ask
for our International Department for assistance. Shipping and handling costs
may apply.