Active display – Canon D20 User Manual
Page 124
Advertising
Viewing
124
To switch images during image display, you can tap the camera gently on the
side, as shown below.
Active Display
Still Images
Movies
•
Always keep the strap around your wrist and hold the camera
securely to avoid dropping it.
•
Images may not be switched in some cases, depending on how the
camera is tapped.
•
To switch images quickly while images are selected as described in step 2 on
p. 122 (after you press the
n button and deactivate [Scroll Display] on the
1 tab), hold down q and tilt the camera. Note that images appear grainy at this
time.
•
To deactivate Active Display, press the
n button, choose [Active Display]
on the
1 tab, and then choose [Off] (p. 42).
Switch to next image
Switch to previous image
Advertising