Canon D20 - Manual (Page 186)

Printing Images
186
Specify the number of prints.
Press the op buttons to specify the number
of prints (up to 99).
To set up printing for other images and specify
the number of prints, repeat steps 2 – 3.
Printing quantity cannot be specified for index
prints. You can only choose which images to
print, by following step 2.
When finished, press the
n button to
return to the menu screen.
Choose [Select Range].
Following step 1 on p. 185, choose [Select
Range] and press the
m button.
Choose images.
Follow steps 2 – 3 on p. 136 to specify images.
Configure the print settings.
Press the op buttons to choose [Order],
and then press the m button.
Choose [Select All Images].
Following step 1 on p. 185, choose [Select All
Images] and press the
m button.
Configure the print settings.
Press the qr buttons to choose [OK], and
then press the m button.
Setting Up Printing for a Range of Images
Setting Up Printing for All Images