20 set the date and time, Set the local time zone, Finish the setup process – Canon D20 User Manual
Page 20
Advertising
Initial Preparations
20
Set the date and time.
Press the
qr buttons to choose an option.
Press the
op buttons to specify the date
and time.
When finished, press the
m button.
Set the local time zone.
Press the
qr buttons to choose your local
time zone.
Finish the setup process.
Press the
m button when finished. After a
confirmation message, the setting screen is
no longer displayed.
To turn off the camera, press the power
button.
•
Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
•
To set daylight saving time (1 hour ahead), choose
in step 2 and then
choose
by pressing the
op buttons.
Advertising