Canon D20 - Manual (Page 156)

Adjusting Basic Camera Functions
156
Adjust screen brightness as follows.
Choose [LCD Brightness], and then press the
qr buttons to adjust the brightness.
Customize the start-up screen shown after you turn the camera on as follows.
Choose [Start-up Image], and then press the
m button.
Press the
qr buttons to choose an option.
Screen Brightness
• For maximum brightness, press and hold the p button for at least one second
when the shooting screen is displayed or when in single-image display. (This
will override the [LCD Brightness] setting on the
3 tab.) To restore the original
brightness, press and hold the p button again for at least one second or restart
the camera.
Start-up Screen
No start-up image
1
Preset image
(cannot be modified)
2
Preset image
Assign a desired shot, or use the included
software to change the image.