Canon FAX-JX210P - Manual (Page 21)

20 Before Using Your Machine
Document Requirements
„ Types of Document You Can Scan
„ Problem Documents
z To prevent document jams in the ADF, do not attempt to load the following types of
documents into the fax:
z Remove all staples, paper clips, etc. before loading the document into the ADF.
z Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the
document into the ADF.
z Make a photocopy of any document that will not feed into the fax so that you can then load the
copy into the ADF.
z Scanned Area
The actual area scanned by the fax is
shown below.
z Size
You can load documents larger than 4.2 in.
(105 mm) wide and 4.2 in. (105 mm) long.
The maximum size of document that can be
loaded is 8.5 in. (216 mm) wide by 15.8 in.
(400 mm) long.
- Wrinkled or creased paper
- Torn paper
- Coated paper or glossy paper
- Thick paper - Curled or rolled paper
- Carbon paper or carbon-backed paper
- Onion skin or thin paper
- Envelopes
LTR/LGL
0.12 ±0.12 in.
(3.0 ±3.0 mm)
0.08 ±0.08 in.
(2.0 ±2.0 mm)
0.08 ±0.14 in.
(2.0 ±3.5 mm) 0.08 ±0.14 in.
(2.0 ±3.5 mm)
Min. 4.2 in.
(105 mm)
Min. 4.2 in.
(105 mm)
Max. 15.8 in.
(400 mm)
Max. 8.5 in. (216 mm)