Canon FAX-JX210P - Manual (Page 29)

28 Sending Faxes
Special Dialing
„ Sending a Document Using Caller History
If the <CALLER ID> setting is set to <ON>, the caller’s name and phone/fax number appear on
the LCD when you receive a call (see page 48). The fax keeps up to 20 latest caller IDs in
memory.
1
Press [Caller History], then wait for 2 seconds or press any button.
The numbers, names, and date and time from which you have received calls recently will be
displayed on the LCD.
z Press [Redial] or [Caller History] to switch between the date and time, name, and phone/fax
number on the LCD.
2
Use [{] or [}] to select the receiving party, then press [Start/Copy].
The fax begins calling the number.
„ Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc. require tone
dialing for their services. If your machine is connected to a rotary pulse line, you can set the
machine to temporarily switch to tone dialing.
1
Press [Hook] or lift the Handset.
2
Use the numeric buttons to dial the number of the information service.
3
When the recorded message of the information service answers, press [Tone] ([ ])
to switch to tone dialing.
If you pressed [Hook] in step 1 and wish to talk to the other party, lift the Handset.
4
Use the numeric buttons to enter the numbers requested by the information
service.
5
When you have finished using the service, press [Hook] or hang up the Handset.
„ Long-Distance Dialing
When you register a long-distance number, you may have to insert a pause within or after the
number. For long-distance dialing, the location and length of the pause may differ depending on
the telephone system. To enter a pause, press [Pause]. The length of this pause can be
adjusted. See <PAUSE TIME> on page 46. A pause at the end of a number is fixed at 10
seconds.
Note
The caller history feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your local
telephone company for detailed information.
01: 3456XXXX ] CANON 01/25/2009 13:30 ]