Canon FAX-JX210P - Manual (Page 50)

49 Settings and Activity Reports
„ ACTIVITY REPORT
Summarizes the information for the sending and receiving activities of your fax after 20
transactions. For automatic printing, see <ACTIVITY REPORT> on page 46.
Transactions in the ACTIVITY REPORT are listed chronologically.
„ ONE-TOUCH SPEED DIAL TELEPHONE NO. LIST
Lists the numbers and names registered under one-touch speed dialing buttons.
„ CODED SPEED DIAL TELEPHONE NO. LIST
Lists the numbers and names registered under coded speed dialing codes.
„ USER’S DATA LIST
Lists the current settings of the fax and the registered sender information.
„ MEMORY LIST
Lists the documents currently stored in the fax’s memory (see page 39).
„ TX REPORT (Transmission Report)
Normally the fax does not print an activity report for transmitting, but you can set the fax to print
an activity report every time you send a document. See <TX REPORT> on page 45.
You can set the fax to print an activity report only when an error occurs during transmitting. See
<TX REPORT> on page 45.
„ RX REPORT (Reception Report)
Normally the fax does not print an activity report for receiving, but you can set the fax to print an
activity report every time you receive a document. See <RX REPORT> on page 45.
You can set the fax to print an activity report only when an error occurs during receiving. See
<RX REPORT> on page 45.
„ MULTI TX REPORT (Multi Transmission Report)
Lists the result of a sequential broadcasting.
If you set the fax to print the TX REPORT and then use sequential broadcasting, the MULTI TX
REPORT will be printed instead of the TX REPORT. See <TX REPORT> on page 45.
Note
The MEMORY CLEAR REPORT is printed automatically when power is restored after a power
failure. See “MEMORY CLEAR REPORT” on page 73.