Canon FAX-JX210P - Manual (Page 41)

40 Receiving Faxes
4
Use [{] or [}] to select the transaction number (<TX/RX NO. > ) of the document
you want to print, then press [Start/Copy]. The LCD toggles between <1ST PAGE
ONLY?> and <YES=( ) NO=(#)>.
If you are unsure of the transaction number (<TX/RX NO.>), print the MEMORY LIST (see
page 39).
5
Press [ ] to print the first page only, or press [#] to print all pages of the document.
The fax prints the document.
„ Printing All Unprinted Documents in Memory
1
Press [Menu].
2
Use [{] or [}] to select <MEMORY REFERENCE>, then press [Start/Copy].
3
Use [{] or [}] to select <PRINT ALL NEW RX>.
4
Press [Start/Copy].
The fax prints the documents one at a time, after each the reception number is displayed on
the LCD.
5
After printing, the LCD displays <YES=( ) NO=(#)>.
6
Press [ ] to delete the previous printed documents.
If you want to keep the documents in memory, press [#].
„ Deleting a Document from Memory
1
Press [Menu].
2
Use [{] or [}] to select <MEMORY REFERENCE>, then press [Start/Copy].
3
Use [{] or [}] to select <DELETE DOCUMENT>, then press [Start/Copy].
4
Use [{] or [}] to select the transaction number (<TX/RX NO. > ) of the document
you want to delete, then press [Start/Copy]. The LCD displays <YES=( ) NO=(#)>.
z If the LCD does not change after you press [{] or [}], this means only one transaction is
stored in memory.
z If you are unsure of the transaction number (<TX/RX NO.>), print the MEMORY LIST (see
page 39).
5
Press [ ] to delete the document.
If you want to keep the document in memory, press [#].
6
To continue deleting other documents in memory, repeat the procedure from step 4.
To finish, press [Stop/Reset].
TX/RX NO. 0001