Operation – FloAire Canopy Hood User Manual
Page 32
32
Pizza Oven Top Mount Flange Installation
1. Thoroughly inspect hood for damage including Pizza Oven Top Mount Flanges.
2. Carefully unpack hood, remove shipping screws from rear flange before moving hood.
3. Use supplied 3M 2000+ fire barrier sealant to apply a double bead to the underside of the
flanges.
4. Centrally position the hood on top of the oven over the opening. The front edge of the side
flanges should be flush with the front face of the oven.
5. Use supplied self-drilling screws to fasten hood to oven. Every mounting holes needs to be used.
Figure 23
OPERATION
Commercial kitchen ventilation hoods are intended to be used in conjunction with ductwork and fans,
which have been properly sized and properly installed in accordance with manufacturer’s specifications
and local code requirements.
Before turning on cooking equipment, make sure that the make-up air and exhaust fans are on. Leave
fans on for at least 30 minutes after cooking equipment is shut off.
Clean hood as needed to comply with local code requirements and as directed in the Maintenance
section of this manual.