Flyzone FLZA2000 - Manual (Page 4)

4
2. With the power switch on the transmitter set to “OFF”, connect
the battery to the charge port inside the charging compartment.
3. If the battery is in a discharged state, the green charge LED will
illuminate. If the battery is already charged, the LED will remain off.
4. When the charging process has been completed, the LED will
go out.
5. After each fl ight, remove the battery pack from the airplane and
allow it to cool completely before recharging.
6. Do not leave the battery connected to the Playmate for an
extended period of time. This can cause permanent damage
to the battery.
BATTERY RECYCLING
ATTENTION: The product you have purchased is powered by a
rechargeable battery. At the end of the battery’s useful life, under
various state and local laws, it may be illegal to dispose of this
battery into the municipal waste system. Check with your local
solid waste offi cials for details in your area for recycling options
or proper disposal.
WARNING: This product contains a chemical known to the State
of California to cause cancer.
FIRST FLIGHT
INSTALL THE AIRPLANE BATTERY
1. Be sure your transmitter has fresh “AA” batteries installed. Turn
on the transmitter by moving the switch up.
2. Connect the battery to the airplane and press it into the battery
compartment. The hook and loop material will hold it in place