Flyzone FLZA2000 - Manual (Page 9)

9
3. If the spring is still attached to the propeller, carefully remove
it from the propeller. Do not stretch the spring. If you no longer
have the spring, contact Product Support at (217) 398-8970,
extension 5.
4. Slide the spur gear onto the pinion gear and move the shaft
forward to the full extent. Next, reinstall the spring onto the
prop shaft.
5. Apply a small amount of CA into the small mounting hole in
the propeller. Quickly move onto step 6 before the CA
fully cures.
6. Using your index finger (or pliers) to hold the spur gear and
shaft into the forward position, press the propeller onto the
shaft and hold for one minute. Inspect the fit and make sure
the propeller is secure and that the spur gear is meshed with
the pinion gear.