Futaba 3PJS - Manual (Page 53)

53
Select Mode Functions
11. (Operating point setting)
Press the SELECT key once.
The operating point set-up
screen is called.
12. Adjust the throttle trigger op-
erating point with the + or -
key.
Operating point:
The throttle trigger po-
sition at which the
A.B.S. function is acti-
vated can be set.
Range over which A.B.S. is not activated
A.B.S activation range
- Return to the initial value (10%)
by pressing the + and - keys si-
multaneously for about one sec-
ond.
Setting range: 10~100%
13. (Steering mixing setting)
Press the SELECT key once.
The steering mixing set-up
screen is called.
14. Adjust the steering mixing
operation range with the + or -
key.
Setting range: OFF, N10~N100%,
E10~E100%
- Return to the initial value (OFF) by pressing the + and - keys
simultaneously for about one second.
Steering mixing:
The range over which the A.B.S.
function reacts to operation of the
steering wheel when the throttle
trigger is pushed to the brake side
can be set.
When the steering wheel was oper-
ated, the A.B.S. function operates
over the range indicated by the *.
N50%
A.B.S. operation range indicated by *
E50%
A.B.S operation range
indicated by * A.B.S operation range
indicated by *
Blink
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM