Futaba 3PJS - Manual (Page 71)

71
SELECT Mode Functions
Lap Timer Setting
1. Call the timer screen by
pressing the DOWN key
twice at the initial screen.
- 2 times
2. Call the timer type selection
screen by pressing the SE-
LECT key once.
3. Select LP with the + or - key.
4. (Alarm setting)
Call the alarm set-up screen
by pressing the SELECT key
once.
5. Set the alarm time with the +
or - key. The race time is set
here.
Setting range: OFF, 1~99m
m: minute
- Return to the initial value (4m) by
pressing the + and - keys simulta-
neously for about one second.
6. (Prealarm setting)
Call the prealarm set-up
screen by pressing the SE-
LECT key once.
7. Set the prealarm time with the
+ or - key.
Setting range: OFF, 1~30s
s: second
- Return to the initial value (OFF)
by pressing the + and - keys si-
multaneously for about one sec-
ond.
8. At the end of adjustment.
press the UP key twice, or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
- 2 times
Blink
Blink
Blink
Blink
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM