Futaba 3PJS - Manual (Page 62)

62
SELECT Mode Functions
5. (Delay point setting)
Press the SELECT key once.
Setting range: OFF, L99~L1,ALL,
H1~H99,OFF
“H”: High side traction control
“L”: Low side traction control
“ALL”: Delay applied over the en-
tire range traction control range.
6. Set the delay point with the +
or - key.
When the throttle trigger is
operated, “*” is displayed
over the traction control func-
tion range and the set point
can be checked.
- Return to the initial value
(L40%) by pressing the + and -
keys simultaneously for about
one second.
RNG L50%
Range over which
delay applied
RNG H50%
Throttle trigger neutral position
7.At the end of adjustment.
press the UP key 4 times, or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
Range over which
delay applied
Throttle trigger High side
- 4 times
Switch Setting
The traction control function is turned on and off with PSH or SLD. Function select
function (Page 89)
Operation Display
The LED flashes while the traction control function is activated.
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
(ALL applies a delay to all areas.)