Futaba 3PJS - Manual (Page 72)

72
SELECT Mode Functions
Lap Timer Operating Instructions
Blink
- 2 times
1. Press the DOWN key two
times at the initial screen. The
timer screen is called.
LP: Lap timer
2. Press the + and - keys simul-
taneously for about one sec-
ond. The timer is reset.
3. To end resetting, press the
UP key two times. (Return to
initial screen.)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
(Reset)
Blink
Starting Linked With Throttle Trigger
The timer is started by the following method. (Other operations are the
same as the operating instructions given above.)
1. Press the DOWN key two
times at the initial screen. The
timer screen is called.
LP: Lap timer
2. (Setting the ready state)
Press the + and - keys simul-
taneously for about one sec-
ond at the timer screen.
READY is displayed and the
timer enters the ready state.
Blink
Blink
(Same as described above.)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
(Resetting)
(Start/lap update/stop)
When the timer switch (initial setting: PSH) is pressed, the timer starts. When the timer
switch is pressed at each lap, the lap times are sequentially memorized. When the timer
switch is pressed after the alarm (after the race time has elapsed), the timer stops.
- The current lap time is displayed for three seconds simultaneously with lap switch input. To prevent the lap
switch from being pressed twice, lap switch input is inhibited while this lap time is being displayed.
- The lap timer can be stopped and restarted by pressing the SELECT key.
(Start/lap update/stop)
When the throttle trigger is moved to the forward side, the timer starts. When the timer
switch is pressed at each lap, the lap times are sequentially memorized. When the timer
switch is pressed after the alarm (after the race time has elapsed), the timer stops.