Philips 54XP43C/37 - Manual (Page 12)

□
F
eature
M
enu
C
ontrols
(
continued
)
CABLE TUNING
O
y ou need to make sure the TV is
set to pick up either Cable TV
or Antenna signals. In other wordsy
the TV needs to know if you
connected a Cable TV signal or a
normal antenna to its ANTENNA
plug.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide)y this task has already been
completed for you.
C begin J
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M)^*^ buttons.
Then press the MENU button.
<|> Press the MENU AT buttons
to move the RED highlight. Press
the MENU button to select
(u^) the
desired mode - For Example:
CABLE.
CABLE- If you DO have
Cable TV connected
to the TV. Channels
1- 125 available.
NORMAL- If you have an
Antenna connected
to the TV. Channels
2- 69 available.
<l>
Press the STATUS button to
clear the screen.
= FEATURE MENU
1 CABLE 1
1 TUNING 1
CON/OfTiiPOsiisWAPyntEtZIJ
Note: Both ANT(enna) A and ANT B inputs
on the rear of the TV can be set for the correct
connected signal (either an Antenna or Cable
TV source).
12