Philips 54XP43C/37 - Manual (Page 43)

A Tow that you have com pleted
ly the required connections on
the previous page you are ready to
follow the simple steps shown
below.
Turn the TV ON.
Place the TV's PIP SOURCE
SELECT control to "ANT B"-
. With FEATURES MENU (4
of 5) on screen, move the RED
highlight with the MENU (M)
buttons. Then press the
MENU button.
• Press the MENU AT and
MENU (M) buttons to
highlight and select the
ANT B" (i>) item.
Also place the TV's Main
screen PICTURE SOURCE
SELECT control to "ANT A"-
• See the Picture Source option
FEATURES MENU (1 of 5).
Press the STATUS button to
clear the screen when the above
Menu items have been set.
<S> Press the PIP ON/OFF button
on the remote.
The PIP window should show in
one of the comers of the TV
screen.
<i>
Press the SWAP (or MOPJ )
buttons on the remote to move the
ANT B and ANT A Input pictures
between the PIP window and
Main screen.
Use the Channel Number or CH
AT buttons to select desired
programs for viewing. Program
Sound occurs with the channels
displayed on the Main screen
S m a r t H k i . p
Remember, if you see the
# same picture on the main
screen and in the PIP window,
check to be sure the TV’s PIP
Source Select and Main screen
Picture Source select are set for
ANT B and ANT A respectively.
See the following page on how to
operate other PIP features with the
TV’s remote control.
- MAIN SCREEN -PIP WINDOW -
MAIN PICTURE SOURCE SELECT SET
TO "ANTA"
BLACK frame around the PIP window appears
when the ANT A Input is on the Main screen.
WHITE frame around the PIP window appears
when the ANT B Input is on the Main screen.
Main Screen is CH 5 from ANT A input.
PIP is CH 8 from ANT B input
on remote then
adjust channels
with CHAT or
Number buttons
Main Screen shows CH 8 from ANT B input.
PIP is CH 5 from ANT A input.
NOTE: Sound for TV programs
displayed in the PIP window can also
be heard through the use of PIP
AUDIO OUT jacks on the rear of the
TV. Just connect the TV’s Left/Right
PEP AUDIO OUTPUTS to the correct
AUX(iliary) Inputs on an external
Stereo sound system (through which
the PIP audio will be played).
h
plji]
1
PIP AUDIO
OUTPUT will
be monaural
(mono) when
both ANT A and
ANT B are being
used for normal
PIP operation.
See page 26 for
details on other
stereo sound
uses for the PIP
Audio Output
jacks.
43