Philips 54XP43C/37 - Manual (Page 29)

U sing the A udio A^ ideo I nput J acks ( continued )
ALX 3 INPUTS
F or m ore convenient Direct
playback connections the TV’s
Front AudioIVideo Input panel can
be used. Located next to the TV’s
front control panel (under a small
cover door) these Input jacks allow
for quick and easy connections,
particularly for the playback of^
Cam corder tape recordings.
To view the playback of a
Cam corder recording using the
AudioIVideo Input jacks on the
front of the TV:
C becin J
Connect the VIDEO OUT jack
from the Camcorder to the Front
VIDEO IN jack on the TV.
<i> Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
Camcorder to the Front AUDIO IN
jacks on the TV.
<s>
Select the " AUX 3”
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the REDJiighlight
with the MENU (M) ^buttons.
Then press the MENU button.
<j> Press the MENU AT and
MENU (M) buttons to highlight
and select
(i^) the AUX 3 mode.
Turn the Camcorder ON and
press PLAY to view the tape on
the TV.
S mart H ki . p
Remember, after it is
i connected an easy way to
select the AUX 3 mode is to press
the VCR button on the front of the
TV (or the TV/VCR button on the
remote). Channels 3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected in this
way.
If you have added AUX 3 to the
TV’s channel memory (see page
14), just press the CHANNEL
AT buttons to select the
VCR/AUX mode.
PICTURE AND SOUND FROM PLAYBACK
OF CAMCORDER TAPE
If you have a single (monaural)
Audio Output Camcorder, "Y"
connectors are available to complete
your connection. Contact your
dealer, or our Parts Information
Center (1-800-292-6066) to order
any optional accessories.
29