Philips 54XP43C/37 - Manual (Page 28)

U sing the A udio A^ ideo I nput J acks
VCR/AL X INPUTS
7 '^he TV's AudiolVideo Input
jacks are for direct picture and
sound connections between the TV
and a VCR (or Video Disc Player,
etc.) that has AudiolVideo O utput
jacks.
To view the playback of a VCR
tape by using the AudiolVideo
Input jacks on the TV:
<i>
t BEGIN)
Connect the VIDEO OUT jack
from the VCR to the AUX 1 .
VIDEO IN jack on the TV.
<i> Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
VCR to the AUX 1 AUDIO IN
jacks on the TV.
<S>
Select the "AUXl "
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the RED^ighlight
with the MENU (M) ^•►buttons.
Then press the MENU button.
<|> Press the MENU AT and
MENU (M) buttons to highlight
and select (i>) the AUX 1 mode.
Turn the VCR ON and press
PLAY to view the tape on the
TV.
S m a r t H i : l p
_ Remember, after it is
® connected an easy way to
select the AUX 1 mode is to press
the VCR button on the front of the
TV (or the TV/VCR button on the
remote.) Channels 3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected in this
way.
If you have added AUX 1 to the
TV’s channel memory (see page
14), just press the CHANNEL
AV buttons to select the AUX 1
mode.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
NOTE: Connections and use of the
TV's AUX 2 Audio/Video Input jacks
are the same as for the AUX I jacks
(except "AUX 2" is selected as the
Picture Source in step 3).
If you have a single (monaural)
Audio Output VCR, "Y" connectors
are available to complete your
connection. Contact your dealer, or
our Parts Information Center (1-800-
292-6066) to order any optional
accessories.
28