Future Retro Swynx User Manual
Page 17
If you fail to press the Start/Stop switch before playback is stopped, the
CR-78 will not play from the beginning of the bar when playback is
started again.
Stop playback of the master MIDI clock, and playback of all devices
syncing to the Swynx will stop.
A FEW NOTES ON SYNCING
It is normal for the first clock generated (when playback starts) to be
shorter in duration than typical for the selected Time Signature and
tempo. This is due to the way the Swynx has to calculate incoming MIDI
clocks to generate the output clock signals.
Changes to the master tempo can in some cases cause timing errors
while syncing. In general slowing the tempo down will not cause
problems. But when increasing the tempo, do so with gradual changes.
Increasing the tempo quickly may cause missed MIDI clocks to occur.