Preparing the cr-78 for programming, Press the start/stop switch of the cr-78, The cr-78 is now ready to be programmed – Future Retro Swynx User Manual

Page 18

Advertising
background image

PREPARING THE CR-78 FOR PROGRAMMING

•

Connect the MIDI OUT of a MIDI keyboard to the MIDI IN of the
Swynx.

•

Connect the Ring portion of the Swynx phone jack to the Write IN of
the CR-78.

•

Set the analog output switch on the Swynx to the CR-78 position.

•

Select one of the CR-78’s four user memory locations to write to.

•

Set the CR-78 Programmer switch to the ALL position, and press the
CLEAR key. This clears out the contents of this user memory
location.

•

Connect the Tip portion of the Swynx phone jack to the CR-78’s
Clock IN.

•

Set the CR-78 Programmer switch to the MEMORY position.

•

Press the Start/Stop switch of the CR-78.

•

The CR-78 is now ready to be programmed.

Advertising