Future Retro Revolution Owner Manual - Manual (Page 13)

DSP EFFECTS
The Revolution provides 16 preset stereo 24 bit DSP effects for processing both internal and external
sounds.
SELECTING EFFECTS To select an effect, rotate the center control switch to the desired effect.
MIX L This is the dry/wet control for the left output channel. Turning this control clockwise will
increase the amount of processed signal heard on the left output channel. When this control is turned
fully counter-clockwise, the DSP effects will be bypassed and only the dry analog audio signal will
be heard on the left output channel. The mix ratio for this control is 100% dry to 100% wet.
MIX R This is the dry/wet control for the right output channel. Turning this control clockwise will
increase the amount of processed signal heard on the right output channel. When this control is turned
fully counter-clockwise, the DSP effects will be bypassed and only the dry analog audio signal will
be heard on the right output channel. The mix ratio for this control is 100% dry to 100% wet.
Using different combinations of dry/wet settings for each channel will help place the audio within the
stereo field.
You could set one channel to dry and the other to wet when recording so that you can come back later
when mixing those tracks to get the perfect balance of dry and processed signals for the overall mix.
With some effects, the output level may decrease as the mix controls are turned clockwise. You may
need to make adjustments to the Volume control to make up for this attenuation.
11