GMC 2012 Savana User Manual

Page 160

Advertising
background image

Black plate (46,1)

GMC Savana Owner Manual - 2012 - 2nd - 11/11/11

5-46

Instruments and Controls

10 SECONDS (default): The
exterior lamps will stay on for
10 seconds.

1 MINUTE: The exterior lamps will
stay on for one minute.

2 MINUTES: The exterior lamps will
stay on for two minutes.

NO CHANGE: No change will be
made to this feature. The current
setting will remain.

To select a setting, press

V

while

the desired setting is displayed on
the DIC.

APPROACH LIGHTING

This feature allows you to select
whether or not to have the exterior
lamps turn on briefly during low light
periods after unlocking the vehicle
using the Remote Keyless
Entry (RKE) transmitter.

Press

U

until APPROACH

LIGHTING appears on the DIC
display. Press

V

once to access the

settings for this feature. Then press

U

to scroll through the following

settings:

OFF: The exterior lamps will not
turn on when you unlock the vehicle
with the RKE transmitter.

ON (default): If it is dark enough
outside, the exterior lamps will turn
on briefly when you unlock the
vehicle with the RKE transmitter.
The lamps will remain on for
20 seconds or until

Q

on the RKE

transmitter is pressed, or the vehicle
is no longer off. See Remote
Keyless Entry (RKE) System
Operation on page 2‑3
for more
information.

NO CHANGE: No change will be
made to this feature. The current
setting will remain.

To select a setting, press

V

while

the desired setting is displayed on
the DIC.

CHIME VOLUME

This feature allows you to select the
volume level of the chime.

Press

U

until CHIME VOLUME

appears on the DIC display. Press

V

once to access the settings for

this feature. Then press

U

to scroll

through the following settings:

NORMAL: The chime volume will
be set to a normal level.

LOUD: The chime volume will be
set to a loud level.

NO CHANGE: No change will be
made to this feature. The current
setting will remain.

There is no default for chime
volume. The volume will stay at the
last known setting.

To select a setting, press

V

while

the desired setting is displayed on
the DIC.

Advertising